Seat Second Row: Installation

WARNING: This page is about a different car, the 2015 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.

RH 40 percent seat

1.

Position the seat in the vehicle and install the retainers.
1. 1.
  
  Install the riser/seat track-to-floor pan rear inboard nut.
  - Tighten to 48 Nm (35 lb-ft).
1. 2.
  
  Install the riser/seat track-to-floor pan rear outboard nut.
  - Tighten to 48 Nm (35 lb-ft).
1. 3.
  
  Install the riser/seat track-to-floor pan front outboard bolt.
  - Tighten to 48 Nm (35 lb-ft).
1. 4.
  
  Install the riser/seat track-to-floor pan front inboard bolt.
  - Tighten to 48 Nm (35 lb-ft).

Courtesy of FORD MOTOR COMPANY

LH 40 percent or 60 percent seat

2.

Position the seat in the vehicle and install the retainers.
1. 1.
  
  Install the riser/seat track-to-floor pan rear inboard nut.
  - Tighten to 48 Nm (35 lb-ft).
1. 2.
  
  Install the riser/seat track-to-floor pan rear outboard nut.
  - Tighten to 48 Nm (35 lb-ft).
1. 3.
  
  Install the riser/seat track-to-floor pan front outboard bolt.
  - Tighten to 48 Nm (35 lb-ft).
1. 4.
  
  Install the riser/seat track-to-floor pan front inboard bolt.
  - Tighten to 48 Nm (35 lb-ft).

Courtesy of FORD MOTOR COMPANY

All seats

3.

If equipped, connect the electrical connector(s).

4.

If equipped with inflatable safety belts, repower the SRS. Refer to Supplemental Restraint System .