Powertrain/Drivetrain Mount Neutralizing

NOTE: Refer to ENGINE MECHANICAL - 3.5L or ENGINE MECHANICAL - 3.5L-GTDI procedure for special instructions on loosening and tightening mount fasteners.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
Loosen, but do not remove, the powertrain/drivetrain mount fasteners.
Lower the vehicle.

NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

Start the vehicle and move it in forward 0.6-1.2 m (2-4 ft). Then move the vehicle in reverse the same distance.
Raise and support the vehicle.
Tighten the powertrain/drivetrain mount fasteners.
Lower the vehicle.
Test the system for normal operation.