Component testing procedure
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
ROOF OPENING PANEL SWITCH COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Tilt | 2 and 6 | Tilt open (push) | Closed circuit |
| 2 and 6 | Tilt close (pull) | Closed circuit | |
| Open | 2 and 4 | Tilt open (push) | Closed circuit |
| 2 and 4 | Slide open (push) | Closed circuit | |
| Close | 2 and 3 | Tilt close (pull) | Closed circuit |
| 2 and 3 | Slide close (pull) | Closed circuit |