Seat Backrest Second Row, 40 Percent: Disassembly
WARNING: This page is about a different car, the 2015 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
>Disassembly
NOTE:
Seat without inflatable safety belts shown. Limo, livery and seat with inflatable safety belts similar.
NOTE:
For parts identification and location, refer to Seat - Exploded View, Second Row in this service information.
- 1.
Remove the seat backrest. For additional information, refer to Seat Backrest - Second Row, 40 Percent in this service information.
- 2.
Remove the head restraint guide sleeves. For additional information, refer to Head Restraint Guide Sleeve in this service information.
- 3.NOTE: Use care when separating the backrest cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the backrest foam pad.
Separate the hook-and-loop strips, invert the backrest cover, remove the hog rings and the backrest cover.
- 6.
Separate the electrical connector pin-type retainer, remove the 3 screws, disengage from the hard back panel and remove the backrest Thermo-Electric Device (TED).
- 7.
Disengage the cable retainer, drill the rivet out, disengage the retaining clips and remove the power lumbar.