Lumbar Assembly Second Row: Removal

WARNING: This page is about a different car, the 2015 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.

>Removal

WARNING: Before beginning any service procedure in this service information, refer to Safety Warnings in SERVICE INFORMATION

NOTE: For parts identification and location, refer to Seat - Exploded View, Second Row in this service information.

1.

Release the backrest cover J-clips.

Courtesy of FORD MOTOR COMPANY

2.

NOTE: Use care when separating the backrest cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the backrest foam pad.

Separate the hook-and-loop strips and invert the backrest cover up as far as it will go.

Courtesy of FORD MOTOR COMPANY

3.

Pull the backrest foam pad away from the backrest frame.

4.

Drill the rivet out, disconnect the electrical connector, disengage the retaining clips and remove the power lumbar.

Courtesy of FORD MOTOR COMPANY

5.

To install, reverse the removal procedure.