Torque Specifications
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Low-pressure service gauge port valve cap | 0.8 | - | 7 |
| High-pressure service gauge port valve cap | 0.8 | - | 7 |
| Low-pressure Schrader-type valve | 1.8 | - | 16 |
| High-pressure Schrader-type valve | 2.5 | - | 22 |
| A/C compressor manifold bolt | 20 | 15 | - |
| A/C compressor bolts | 25 | 18 | - |
| Compressor manifold and tube assembly bracket nut | 12 | 9 | - |
| A/C compressor nuts (4.0L) | 25 | 18 | - |
| A/C compressor studs (4.0L) | 13 | 10 | - |
| A/C clutch disc and hub bolt | 13 | 10 | - |
| Speed control actuator bolt | 11 | 8 | - |
| A/C peanut fitting nut | 8 | - | 71 |
| Oil indicator bracket nut | 12 | 9 | - |
| Radiator bolts | 7 | - | 62 |
| Condenser core bolts | 12 | 9 | - |
| Evaporator core housing nuts | 4 | - | 35 |
| Plenum chamber nuts | 4 | - | 35 |
| Suction accumulator inlet fitting | 39 | 29 | - |
| Instrument panel support brace bolts | 9 | - | 80 |