Inspection and Verification
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the customer's concern by operating the acceleration control system to duplicate the condition.
- Inspect to determine if any of the following mechanical concerns apply.VISUAL INSPECTION CHART
Mechanical - Damaged accelerator pedal and shaft
- Damaged linkage
- Damaged accelerator cable
- High engine idle speed
- Damaged throttle body
- If the inspection reveals an obvious concern that can be readily identified, repair it as required.
- If the concern remains after the inspection, determine the symptom(s) and go to the Symptom Chart.