Selector Lever Knob: Installation

Vehicles equipped with a TCS 

1. Route the TCS wiring harness through the selector lever bezel. Connect the TCS electrical connector and position the selector lever knob and bezel in place on the selector lever and the center console.
   Fig 1: Locating TCS Electrical Connector

   Courtesy of FORD MOTOR CO.
2. Install the 4 selector lever bezel screws.
   Fig 2: Locating Selector Lever Bezel Screws

   Courtesy of FORD MOTOR CO.
3. Connect the storage compartment lighting electrical connector, position the storage compartment on the center console and install the 4 screws.
   Fig 3: Locating Storage Compartment Lighting Electrical Connector And Storage Compartment Screws

   Courtesy of FORD MOTOR CO.
4. Connect the electrical connectors and install the 2 center console trim panels.
   Fig 4: Locating Center Console Trim Panels And Electrical Connectors

   Courtesy of FORD MOTOR CO.

   Vehicles equipped with paddle shifters 

5. Position the selector lever knob on the selector lever.

   All vehicles 

6. Install the 2 selector lever knob screws.
   Fig 5: Locating Selector Lever Knob Screws

   Courtesy of FORD MOTOR CO.
7. Slide the selector lever knob bezel up and install it on the selector lever bezel knob.
   Fig 6: Sliding Selector Lever Knob Bezel Down

   Courtesy of FORD MOTOR CO.