LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Taurus SE >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls >> Removal And Installation >> Selector Lever >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever: Removal

  1. Remove the selector lever bezel. For additional information, refer to SELECTOR LEVER BEZEL  .
  2. Remove the selector lever cable end from the selector lever ball stud.
    Fig 1: Locating Selector Lever Cable End On Selector Lever Ball Stud
    G06258777Courtesy of FORD MOTOR CO.
  3. Release the 2 tabs and remove the selector lever cable from the selector lever.
    Fig 2: Locating Selector Lever Cable Tabs
    G06258778Courtesy of FORD MOTOR CO.
  4. Disconnect the selector lever electrical connector.
    Fig 3: Locating Selector Lever Electrical Connector
    G06258813Courtesy of FORD MOTOR CO.
  5. Remove the 4 selector lever bolts and the selector lever from the vehicle.
    Fig 4: Locating Selector Lever Bolts
    G06258814Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals