Component testing procedure
COMPONENT TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Window adjust switches | 1 and 2 | Up (1st detent) | Closed circuit |
| 1 and 3 | Open circuit | ||
| 1 and 2, 1 and 3 | Up (2nd detent) | Closed circuit | |
| 1 and 3 | Down (1st detent) | Closed circuit | |
| 1 and 2 | Open circuit | ||
| 1 and 2, 1 and 3 | Up (2nd detent) | Closed circuit |