Component testing procedure
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
MASTER WINDOW ADJUST SWITCH - MKX COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Switch lock | 3, C535b and 4, C535b | Lock On | Closed circuit |
| Lock Off | Open circuit | ||
| Left front window circuit | 3, C535a and 4, C535a | Up | Closed circuit |
| 3, C535a and 7, C535a | Down | Closed circuit | |
| 3, C535a and 8, C535a | One-Touch Up/Down | Closed circuit | |
| Right front window circuit | 3, C535a and 5, C535a | Up | Closed circuit |
| 3, C535a and 2, C535a | Down | Closed circuit | |
| 3, C535a and 1, C535a | One-Touch Up/Down | Closed circuit | |
| Left rear window circuit | 3, C535b and 2, C535b | Up | Closed circuit |
| 3, C535b and 1, C535b | Down | Closed circuit | |
| Right rear window circuit | 3, C535b and 8, C535b | Up | Closed circuit |
| 3, C535a and 7, C535b | Down | Closed circuit |