Engine Mechanical - 2.0L: Assembly: Engine: Notes
SPECIAL TOOLS
| Aligner, Crankshaft Sensor 303-1417 |
|
| Alignment Plate, Camshaft 303-465 (T94P-6256-CH) |
|
| Compressor, Piston Ring 303-D032 (D81L-6002-C) |
|
| Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) |
|
| 2, 200# Floor Crane, Fold Away 300-OTC1819E or equivalent |
|
| Holding Tool, Crankshaft Damper 303-1416 |
|
| Installer, Camshaft Front Oil Seal 303-096 (T74P-6150-A) |
|
| Installer, Connecting Rod 303-462 (TOOL-6136-AH) |
|
| Installer, Crankshaft Rear Main Oil Seal 303-328 (T88P-6701-B1) |
|
| Spreader Bar 303-D089 (D93P-6001-A3) or equivalent |
|
| Timing Peg, Crankshaft TDC 303-507 |
GENERAL EQUIPMENT
| 6 mm x 18 mm bolt |
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Motorcraft® Metal Surface Prep ZC-31-A |
- |
| Motorcraft® Orange Antifreeze/Coolant Concentrated VC-3-B (US); CVC-3-B2 (Canada) |
WSS-M97B44-D |
| Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada) XO-5W20-QSP (US); CXO-5W20-LSP12 (Canada) |
WSS-M2C945-A |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A |
ESE-M1C171-A |
| Silicone Gasket and Sealant TA-30 |
WSE-M4G323-A4 |