ABS with AdvanceTrac® and Roll Stability Control (RSC®): Notes

The ABS with AdvanceTrac® and Roll Stability Control (RSC®) system consists of the same components as the conventional ABS above with the following additional components:

• Stability control sensors - located under the front floor console, in front of the gear selector lever assembly and contains several sensors (yaw rate, roll rate, lateral accelerometer and longitudinal accelerometer).
• Steering wheel rotation sensor and sensor ring assembly - the rotation sensor and ring assembly is a sealed unit that is located on the backside of the clockspring and is serviced separately from the clockspring.

The AdvanceTrac® with RSC® system is made up of the following 3 distinct vehicle systems:

• Traction Control System - helps to avoid excessive drive-wheel spin and loss of traction.
• Electronic Stability Control (ESC) - helps to avoid skids and lateral slides.
• RSC® - helps to avoid vehicle roll-over.