LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Transit Connect Base, Van Cargo >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls >> Removal And Installation >> Selector Lever Knob >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Knob: Installation

  1. Position the selector lever knob onto the selector lever and route the wiring harness through the selector lever bezel.
    Fig 1: Locating Selector Lever And Wiring Harness
    G06293341Courtesy of FORD MOTOR CO.
  2. Slide the selector lever knob down the selector lever and install a new screw.
    Fig 2: Sliding Selector Lever Knob Down Selector Lever
    G06293342Courtesy of FORD MOTOR CO.
    3. NOTE: Selector lever assembly removed for clarity.
    Fig 3: Locating O/D Switch Electrical Connector
    G06293339Courtesy of FORD MOTOR CO.
  3. Connect the O/D switch electrical connector.
  4. Install the floor console. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
scientia non olet · About LEMON Manuals