Hydraulic Control Unit (HCU): Installation
- To install, reverse the removal procedure.
- If a new Hydraulic Control Unit (HCU)/Anti-Lock Brake System (ABS) module was installed, download the ABS
module configuration from the scan tool to the new ABS
module.
Refer to: MODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTION .
- If a new Hydraulic Control Unit (HCU)/Anti-Lock Brake System (ABS) module was installed, carryout the initialization using the scan tool and following the scan tool on-screen instructions.
- Refer to: BRAKE SYSTEM BLEEDING .