LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> C-Max Energi >> Repair and Diagnosis >> General Information >> DTC Index >> Automatic Transaxle/Transmission DTCS
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Automatic Transaxle/Transmission DTCS

NOTE: Using the diagnostic scan tool, the TR  sensor and the TFT  sensor Diagnostic Trouble Codes (DTCs) are located within the SOBDMC/ TCM  .
DTC Description Action
P0710:11 Transmission Fluid Temperature Sensor "A" GO to PINPOINT TEST B
P0710:15 Transmission Fluid Temperature Sensor "A" GO to PINPOINT TEST B
P0710:62 Transmission Fluid Temperature Sensor "A" GO to PINPOINT TEST B
P0C27:00 Electric Transmission Fluid Pump Motor Current Low GO to PINPOINT TEST C
P0C28:00 Electric Transmission Fluid Pump Motor Current High GO to PINPOINT TEST C
P0C2C:00 Electric Transmission Fluid Pump Control Module Feedback Signal Range/Performance GO to PINPOINT TEST C
P0C2D:00 Electric Transmission Fluid Pump Control Module Feedback Signal Low GO to PINPOINT TEST C
P0C2E:00 Electric Transmission Fluid Pump Control Module Feedback Signal High GO to PINPOINT TEST C
P175A:00 Transmission Fluid Over Temperature Condition - Electric Transmission Fluid Pump Disabled GO to PINPOINT TEST C
P2796:00 Electric Transmission Fluid Pump Control Circuit GO to PINPOINT TEST C
P2800:00 Transmission Range Sensor "B" Circuit (PRNDL Input) GO to PINPOINT TEST A
P2801:00 Transmission Range Sensor "B" Circuit Range/Performance GO to PINPOINT TEST A
P2802:00 Transmission Range Sensor "B" Circuit Low GO to PINPOINT TEST A
P2803:00 Transmission Range Sensor "B" Circuit High GO to PINPOINT TEST A
P2806:00 Transmission Range Sensor Alignment GO to PINPOINT TEST A
P2806:79 Transmission Range Sensor Alignment GO to PINPOINT TEST A
P26C3:00 Internal Control Module Transmission Range Sensor Performance If DTC  P26C3:00 is present along with other TR  sensor Diagnostic Trouble Codes (DTCs), GO to PINPOINT TEST A If the wrench lamp is illuminated and DTC  P26C3:00 is the only code present, CLEAR the DTC  and PERFORM the self-test. If the DTC  returns, INSTALL a new PCM  . REFER to: POWERTRAIN CONTROL MODULE (PCM) .