Driver Door Module (DDM)
| DTC | Description | Action |
|---|---|---|
| B12AB:11 | Front Window Position Sensor Power Supply: Circuit Short To Ground | GO to PINPOINT TEST C |
| B12C3:11 | Rear Window Position Sensor Power Supply: Circuit Short To Ground | GO to PINPOINT TEST F |
| B12C5:02 | Front Window Lifter Motor Up Relay: General Signal Failure | GO to PINPOINT TEST C |
| B12C6:02 | Rear Window Lifter Motor Up Relay: General Signal Failure | GO to PINPOINT TEST F |
| B12C7:02 | Rear Window Lifter Motor Down Relay: General Signal Failure | GO to PINPOINT TEST F |
| B12C8:02 | Front Window Lifter Motor Down Relay: General Signal Failure | GO to PINPOINT TEST C |
| B12DC:02 | Front Window Motion/Position Sensor: General Signal Failure | GO to PINPOINT TEST C |
| B12DC:54 | Front Window Motion/Position Sensor: Missing Calibration | GO to PINPOINT TEST E |
| B12DD:02 | Rear Window Motion/Position Sensor: General Signal Failure | GO to PINPOINT TEST F |
| B12DD:54 | Rear Window Motion/Position Sensor: Missing Calibration | GO to PINPOINT TEST E |
| B12E9:02 | Rear Window Local Up/Down Switch: General Signal Failure | GO to PINPOINT TEST F |
| U2013:01 | Switch Pack: General Electrical Failure | INSTALL a new driver door window control switch. REFER to: FRONT DOOR WINDOW CONTROL SWITCH (501-11 Glass, Frames and Mechanisms, Removal and Installation). |
| U2013:87 | Switch Pack: Missing Message | GO to PINPOINT TEST C |
| All other DTCs | - | REFER to: LOCKS, LATCHES AND ENTRY SYSTEMS (501-14 Handles, Locks, Latches and Entry Systems, Diagnosis and Testing). |