RFA Module
| DTC | Description | Action |
|---|---|---|
| B102B:00 | Passive Key: No Sub Type Information | GO to PINPOINT TEST G |
| B102B:05 | Passive Key: System Programming Failure | Less than 2 keys are programmed. PROGRAM additional keys (a minimum of 2 keys must be programmed). REFER to: KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT (419-01C Passive Anti-Theft System (PATS) - Vehicles With: Push Button Start, General Procedures). |
| B10C7:1F | Interior Trunk Antenna: Circuit Intermittent | GO to PINPOINT TEST A |
| B10C8:1F | Interior Centre Antenna: Circuit Intermittent | GO to PINPOINT TEST A |
| B10C9:1F | Interior Front Antenna: Circuit Intermittent | GO to PINPOINT TEST A |
| B11CC:51 | Immobilizer Keyless Vehicle Secret Key: Not Programmed | There is no BCM
ID stored in the RFA
module. CARRY OUT a parameter reset. REFER to: PASSIVE ANTI-THEFT SYSTEM (PATS) PARAMETER RESET (419-01C Passive Anti-Theft System (PATS) - Vehicles With: Push Button Start, General Procedures). |
| B1399:00 | Personalised Key Synchronisation: No Sub Type Information | ERASE and PROGRAM all of the customer's keys. REFER to: ERASE ALL KEYS AND KEY PROGRAMMING (419-01C Passive Anti-Theft System (PATS) - Vehicles With: Push Button Start, General Procedures). |
| U201F:00 | External Receiver: No Sub Type Information | REFER to: LOCKS, LATCHES AND ENTRY SYSTEMS (501-14 Handles, Locks, Latches and Entry Systems, Diagnosis and Testing). |
| U201F:13 | External Receiver: Circuit Open | REFER to: LOCKS, LATCHES AND ENTRY SYSTEMS (501-14 Handles, Locks, Latches and Entry Systems, Diagnosis and Testing). |
| U201F:87 | External Receiver: Missing Message | REFER to: LOCKS, LATCHES AND ENTRY SYSTEMS (501-14 Handles, Locks, Latches and Entry Systems, Diagnosis and Testing). |
| All other DTCs | - | REFER to: REMOTE FUNCTION ACTUATOR (RFA) MODULE (419-10 Multifunction Electronic Modules, Diagnosis and Testing). |