Starting System DTCS: Pcm
PCM DTC CHART
| DTC | Description | Action |
|---|---|---|
| P0512 | Starter Request Circuit | CARRY OUT the Ignition Switch component test. Refer to appropriate "OEM WIRING DIAGRAMS COMPONENT TESTING" article for component testing. If necessary, INSTALL a new ignition switch. REFER to STEERING COLUMN SWITCHES . If the ignition switch passed the component test, REPAIR circuit CDC35 (BU/WH) for a short to voltage. |
| P0706 | Transmission Range Sensor "A" Circuit Range/Performance | REFER to AUTOMATIC TRANSMISSION - 6F50/6F55 or AUTOMATIC TRANSAXLE/TRANSMISSION - 6F35 . |
| P0708 | Transmission Range Sensor "A" Circuit High | REFER to AUTOMATIC TRANSMISSION - 6F50/6F55 or AUTOMATIC TRANSAXLE/TRANSMISSION - 6F35 . |
| P161A | Incorrect Response From Immobilizer Control Module | REFER to ANTI-THEFT SYSTEM - PASSIVE ANTI-THEFT SYSTEM . |
| P1702 | Transmission Range Sensor Circuit Intermittent | REFER to AUTOMATIC TRANSMISSION - 6F50/6F55 or AUTOMATIC TRANSAXLE/TRANSMISSION - 6F35 . |
| P1705 | Transmission Range Circuit Not Indicating Park/Neutral During Self Test | REFER to AUTOMATIC TRANSMISSION - 6F50/6F55 or AUTOMATIC TRANSAXLE/TRANSMISSION - 6F35 . |
| P2532 | Ignition Switch Run Position Circuit High | GO to PINPOINT TEST G . |
| P2535 | Ignition Switch Run/Start Position Circuit High | GO to PINPOINT TEST G . |
| All other DTCs | - | REFER to ENGINE CONTROLS - ELECTRONIC ENGINE CONTROLS . |