Accessory Protocol Interface Module (APIM) 8-Inch (203 Mm) Touchscreen Sync®
ACCESSORY PROTOCOL INTERFACE MODULE (APIM) DTC CHART - 8-INCH (203 MM) TOUCHSCREEN SYNC®
| DTC | Description | Action |
|---|---|---|
| C1001: 01 | Vision System Camera: General Electrical Failure | REFER to PARKING AID SYSTEM . |
| B108E: 01 | Display: General Electrical Failure | GO to Pinpoint Test O . |
| B116A: 01 | Handset Microphone: General Electrical Failure | GO to Pinpoint Test R . |
| B1215: 00 | External Memory Card: No Sub Type Information | For vehicles with navigation, GO to Pinpoint Test M . For vehicles without navigation, GO to Pinpoint Test H . |
| B1252: 11 | USB Port: Circuit Short To Ground | GO to Pinpoint Test H . |
| B12B8: 11 | USB Port #2: Circuit Short To Ground |
NOTE:
This DTC refers to USB port #2 on the APIM itself, which is not used. INSPECT the APIM USB port #2 for damage and remove any debris. CLEAR the DTCs. REPEAT the self-test. If DTC B12B8: 11 is retrieved again, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM)
. REPEAT the self-test. |
| U0140: 00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test T . |
| U0151: 00 | Lost Communication With Restraints Control Module: No Sub Type Information | GO to Pinpoint Test U . |
| U0155: 00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test V . |
| U0162: 00 | Lost Communication With Navigation Display Module: No Sub Type Information | GO to Pinpoint Test O . |
| U016A: 00 | Lost Communication With Global Positioning System Module: No Sub Type Information | GO to Pinpoint Test W . |
| U0184: 00 | Lost Communication With Radio: No Sub Type Information | GO to Pinpoint Test X . |
| U0238: 00 | Lost Communication With Digital Audio Control Module "D": No Sub Type Information | GO to Pinpoint Test Z . |
| U0256: 00 | Lost Communication With Front Controls Interface Module "A": No Sub Type Information | GO to Pinpoint Test AB . |
| U0423: 00 | Invalid Data Received From Instrument Panel Control Module: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the IPC. |
| U1A00: 87 | Private Communication Network: Missing Message | RETRIEVE and FOLLOW other DTCs present in the IPC. |
| U2017: 45 | Control Module Software #2: Program Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2017: 45 is still present, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM) . REPEAT the self-test. |
| U2017: 51 | Control Module Software #2: Not Programmed | PROGRAM the APIM. REFER to MODULE CONFIGURATION . CLEAR the DTC. REPEAT the self-test. If DTC U2017: 51 is still present, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM) . REPEAT the self-test. |
| U2017: 52 | Control Module Software #2: Not Activated | PROGRAM the APIM. REFER to MODULE CONFIGURATION . CLEAR the DTC. REPEAT the self-test. If DTC U2017: 52 is still present, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM) . REPEAT the self-test. |
| U2017: 54 | Control Module Software #2: Missing Calibration | PROGRAM the APIM. REFER to MODULE CONFIGURATION . CLEAR the DTC. REPEAT the self-test. If DTC U2017: 54 is still present, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM) . REPEAT the self-test. |
| U2100: 00 | Initial Configuration Not Complete: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U2101: 00 | Control Module Configuration Incompatible: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U3000: 04 | Control Module: System Internal Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 04 is still present, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM) . REPEAT the self-test. |
| U3000: 41 | Control Module: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 41 is still present, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM) . REPEAT the self-test. |
| U3000: 42 | Control Module: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 42 is still present, INSTALL a new APIM. REFER to Accessory Protocol Interface Module (APIM) . REPEAT the self-test. |
| U3000: 88 | Control Module: Bus Off | REFER to MODULE COMMUNICATIONS NETWORK . |
| U3003: 16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AD . |
| U3003: 17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AE . |