DTC Chart - BCM

WARNING: This page is about a different car, the 2015 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

DTC	Description	Action
U0001:88	High Speed CAN Communication Bus: Bus Off	A HS-CAN fault was present at a point in time. The fault is not currently present since the module is communicating with the diagnostic scan tool. CLEAR the DTC. REPEAT the network test with the diagnostic scan tool. VERIFY the integrity of the connectors and wiring. Refer to Module Communications Network System for schematic and connector information.
U0010:88	Medium Speed CAN Communication Bus: Bus Off	A MS-CAN fault was present at a point in time. The fault is not currently present since the module is communicating with the diagnostic scan tool. CLEAR the DTC. REPEAT the network test with the diagnostic scan tool. VERIFY the integrity of the connectors and wiring. Refer to Module Communications Network System for schematic and connector information.
U0037:88	Vehicle Communication Bus B: Bus Off	The module could not communicate with the network at a point in time. The fault is not currently present since the module had to communicate with the diagnostic scan tool to report the DTC. VERIFY integrity of the connectors and wiring. Refer to Module Communications Network System for schematic and connector information. If a communication concern is still present, GO to Pinpoint Test AA