Anti-Theft System - Passive Anti-Theft System DTCS (With IA): BCM
BCM DTC CHART
| DTC | Description | Action |
|---|---|---|
| B10D5:94 | PATS Antenna: Unexpected Operation | The BCM received an incomplete or corrupt response from the PATS transceiver. INSTALL a new PATS transceiver, REFER to PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER . |
| B10D7:05 | PATS Key: System Programming Failure | GO to PINPOINT TEST D . |
| B10D7:81 | PATS Key: Invalid Serial Data Received | GO to PINPOINT TEST E . |
| B10D7:87 | PATS Key: Missing Message | GO to PINPOINT TEST F . |
| B10D8:00 | PATS Key Less Than Minimum Programmed: No Sub Type Information | Less than 2 keys are programmed. PROGRAM additional keys (a minimum of 2 keys must be programmed). REFER to KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT . |
| B10DA:51 | PATS Target Identifier: Not Programmed | There is an unprogrammed PATS key. PROGRAM the PATS key. REFER to KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT . |
| B11CC:51 | Immobiliser Keyless Vehicle Secret Key: Not Programmed | There is no RFA module ID stored in the BCM. CARRY OUT a parameter reset. REFER to PASSIVE ANTI-THEFT SYSTEM (PATS) PARAMETER RESET . |
| B1399:05 | Personalised Key Synchronisation: System Programming Failure | ERASE and PROGRAM all of the customer's keys. REFER to KEY PROGRAMMING - ERASE ALL KEY CODES AND PROGRAM TWO KEYS . |
| All other DTCs | - | REFER to MULTIFUNCTION ELECTRONIC MODULES . |