Anti-Theft System - Passive Anti-Theft System DTCS (Without IA): BCM
BCM DTC CHART
| DTC | Description | Action |
|---|---|---|
| B10D5:94 | PATS Antenna: Unexpected Operation | The BCM received an incomplete or corrupt response from the transceiver. INSTALL a new transceiver, REFER to PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER . |
| B10D7:05 | PATS Key: System Programming Failure | GO to PINPOINT TEST B . |
| B10D7:51 | PATS Key: Not Programmed | There is an unprogrammed PATS key. PROGRAM the PATS key. REFER to KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT . |
| B10D7:81 | PATS Key: Invalid Serial Data Received | GO to PINPOINT TEST C . |
| B10D7:87 | PATS Key: Missing Message | GO to PINPOINT TEST D . |
| B10D7:94 | PATS Key: Unexpected Operation | GO to PINPOINT TEST C . |
| B10D8:00 | PATS Key Less Than Minimum Programmed: No Sub Type Information | Less than 2 keys are programmed. PROGRAM additional keys (minimum of 2 keys must be programmed). CYCLE the customer's second key in the ignition key cylinder to program (when less than 2 keys are programmed, the BCM automatically programs the first 2 keys that are cycled in the ignition key cylinder). |
| B10DA:51 | PATS Target Identifier: Not Programmed | There is no BCM ID stored in the BCM memory. CARRY OUT a parameter reset. REFER to PASSIVE ANTI-THEFT SYSTEM (PATS) PARAMETER RESET . |
| All other DTCs | - | REFER to MULTIFUNCTION ELECTRONIC MODULES . |