Repair procedures: Removal

WARNING: This page is about a different car, the 2014 Hyundai Elantra GT and 2013 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Remove the rear seat.
(Refer to "REAR SEAT ASSEMBLY ")
Remove the fuel pump service cover (A).

Fig 1: Identifying Fuel Pump Service Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the fuel tank pressure sensor connector (A).
Remove the fuel tank pressure sensor (B) after releasing the hooks vertically.

Fig 2: Identifying Fuel Tank Pressure Sensor And Connector
Courtesy of HYUNDAI MOTOR AMERICA