| U0140:00 |
Lost Communication With Body Control Module: No Sub Type Information |
GO to PINPOINT TEST Q
. |
| U0155:00 |
Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information |
GO to PINPOINT TEST R
. |
| U0422:00 |
Invalid Data Received From Body Control Module: No Sub Type Information |
REFER to
SUPPLEMENTAL RESTRAINT SYSTEM
to retrieve and follow DTCs present in the RCM. |
| U0423:00 |
Invalid Data Received From Instrument Panel Control Module: No Sub Type Information |
REFER to
INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES
to retrieve and follow DTCs present in the IPC. |
| U2100:00 |
Initial Configuration Not Complete: No Sub Type Information |
CHECK vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, REPEAT/PERFORM the PMI procedure as directed by the scan tool. If there have been no recent service actions, INSTALL a new module to correct the failure to retain configuration data. REFER to GLOBAL POSITIONING SYSTEM MODULE (GPSM)
. |
| U2101:00 |
Control Module Configuration Incompatible: No Sub Type Information |
CHECK vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, REPEAT/PERFORM the PMI procedure as directed by the scan tool. If there have been no recent service actions, INSTALL a new module to correct the failure to retain configuration data. REFER to GLOBAL POSITIONING SYSTEM MODULE (GPSM)
. |
| U3000:09 |
Control Module: Component Failure |
CLEAR the DTCs. REPEAT the self-test. If DTC U3000:09 is still present, INSTALL a new GPSM. REFER to GLOBAL POSITIONING SYSTEM MODULE (GPSM)
. |
| U3000:41 |
Control Module: General Checksum Failure |
CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC U3000:41 is still present, INSTALL a new GPSM. REFER to GLOBAL POSITIONING SYSTEM MODULE (GPSM)
. |
| U3000:42 |
Control Module: General Memory Failure |
CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC U3000:42 is still present, INSTALL a new GPSM. REFER to GLOBAL POSITIONING SYSTEM MODULE (GPSM)
. |
| U3003:16 |
Battery Voltage: Circuit Voltage Below Threshold |
GO to PINPOINT TEST U
. |
| U3003:17 |
Battery Voltage: Circuit Voltage Above Threshold |
GO to PINPOINT TEST V
. |