Front Controls Interface Module (FCIM)
FRONT CONTROLS INTERFACE MODULE (FCIM) DTC CHART
| DTC | Description | Action |
|---|---|---|
| B13DC:11 | Compact Disc Slot Illumination: Circuit Short To Ground | REFER to INSTRUMENT CLUSTER AND PANEL ILLUMINATION . |
| B13DC:12 | Compact Disc Slot Illumination: Circuit Short To Battery | REFER to INSTRUMENT CLUSTER AND PANEL ILLUMINATION . |
| B13DC:13 | Compact Disc Slot Illumination: Circuit Open | REFER to INSTRUMENT CLUSTER AND PANEL ILLUMINATION . |
| U0009:88 | High Speed CAN Communication Bus (-) shorted to Bus (+): Bus off | REFER to MODULE COMMUNICATIONS NETWORK No HS-CAN - All Modules Not Responding. |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to PINPOINT TEST R . |
| U0257:00 | Lost Communication With Front Controls/Display Interface Module: No Sub Type Information | GO to PINPOINT TEST W . |
| U0423:00 | Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information | REFER to INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES to retrieve and follow DTCs present in the IPC. |
| U2013:63 | Switch Pack: Circuit/Component Protection Time-Out | GO to PINPOINT TEST G . |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC U3000:41 is still present, INSTALL a new FCIM. REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) . |
| U3000:42 | Control Module: General Memory Failure | CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC U3000:42 is still present, INSTALL a new FCIM. REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) . |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to PINPOINT TEST U . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to PINPOINT TEST V . |