IPM-B
IPM-B DTC CHART
| DTC | Description | Action |
|---|---|---|
| B115E:08 | Camera Module: Bus Signal/Message Failure | GO to PINPOINT TEST A . |
| B115E:49 | Camera Module: Internal Electronic Failure | CLEAR the DTC. REPEAT the self-test. If DTC B115E:49 returns, INSTALL a new video camera. REFER to VIDEO CAMERA . |
| B115E:55 | Camera Module: Not Configured | This DTC sets in the IPM-B when the video camera is not configured. TURN the ignition ON and leave on for 5 minutes to allow the IPM-B/camera flash operation to complete. |
| U0140:87 | Lost Communication With Body Control Module: Missing Message | GO to PINPOINT TEST H . |
| U0155:87 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: Missing Message | GO to PINPOINT TEST E . |
| U3006:16 | Control Module Input Power "A": Circuit Voltage Below Threshold | GO to PINPOINT TEST F . |
| U3006:17 | Control Module Input Power "A": Circuit Voltage Above Threshold | GO to PINPOINT TEST G . |