Programming a Personal Entry Code

NOTE: The system allows 4 personal codes to be programmed using the keyless entry keypad.

NOTE: Multiple personal codes can be programmed in a single step. When programming multiple codes in a single step, each code must be programmed by entering each button within 5 seconds of each other. If 5 seconds elapse between any button press, programming mode is exited.

NOTE: If only a single personal code is desired or unable to program multiple codes in one step, each personal code can be programmed individually by repeating Steps 1- 5 for each code desired.

Enter the factory set 5-digit keyless entry keypad code.
Within 5 seconds, press the 1/2 button on the keypad to activate the programming mode. The doors lock and then unlock to confirm programming mode is entered.
Enter the new 5-digit keyless entry keypad code. Each number must be entered within 5 seconds of each other.
Enter a sixth digit to indicate which slot in memory the personal entry code is stored.
- Pressing 1/2 stores the first personal code.
- Pressing 3/4 stores the second personal code.
- Pressing other keypad buttons stores the third or fourth personal codes.
The doors lock and unlock to confirm the new code is programmed.