Programming Memory Positions

NOTE: Poor battery condition may interfere with memory seat operation, even if vehicle starting is possible.

Place the vehicle ignition to ON.
To set memory position(s), move the memory driver seat, memory exterior mirrors (if equipped), memory adjustable pedals (if equipped) and memory steering column (if equipped) to the preferred position using the appropriate switch(es).
NOTE: Input from the driver seat control switch, exterior mirror control switch (if equipped), steering column control switch (if equipped) and pedal adjust switch (if equipped) during memory programming cancels or stops the operation.

NOTE: If other tones or chimes are being produced, the memory save tone will not be heard because it is one of the lowest priorities.

Press and hold a memory button (1, 2 or 3) until a tone is heard (1.5 seconds). When the tone is heard, the memory programming is complete.
Repeat the previous steps to program another memory position.