Passive Anti-Theft With Intelligent Access: BCM
DTC DESCRIPTION - BCM
| DTC | Description | Action |
|---|---|---|
| B10DA:51 | PATS Target Identifier: Not Programmed | There is no PCM ID stored in the BCM . CARRY OUT a parameter reset. Refer to Passive Anti-Theft System (PATS) Parameter Reset . |
| All other BCM DTCs | - | REFER to DTC CHART: BCM . |
DTC DESCRIPTION - BCM
| DTC | Description | Action |
|---|---|---|
| B10D7:05 | PATS Key: System Programming Failure | GO to PINPOINT TEST A . |
| B10D7:87 | PATS Key: Missing Message | GO to PINPOINT TEST B . |
| B10D7:8F | PATS Key: Erratic | GO to PINPOINT TEST B . |
| B10D9:87 | PATS Transponder: Missing Message | GO to PINPOINT TEST C . |
| C113A:11 | Wakeup Control: Circuit Short To Ground | GO to PINPOINT TEST D . |
| C113A:15 | Wakeup Control: Circuit Short To Battery or Open | GO to PINPOINT TEST D . |
| All other BCM DTCs | - | REFER to MULTIFUNCTION ELECTRONIC MODULES . |