Automatic Transmission DTCS: 6F50/6F55
DTC DESCRIPTION - PCM
| DTC | Description | Action |
|---|---|---|
| P0657 | Actuator Supply Voltage "A" Circuit/Open | Power to all solenoids has been interrupted, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST F for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST R for 3.5L GTDI engines. |
| P0701 | Transmission Control System Range/Performance | DTCs P2700, P2701, P2702, P2703 and/or P2704 may set. CLEAR the DTCs. If the DTC returns, GO to SYMPTOM CHART . |
| P0706 | Transmission Range Sensor "A" Circuit Range/Performance | Engine may not crank, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST J for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST V for 3.5L GTDI engines. |
| P0707 | Transmission Range Sensor "A" Circuit Low | Engine may not crank, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST J for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST V for 3.5L GTDI engines. |
| P0708 | Transmission Range Sensor "A" Circuit High | Engine may not crank, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST J for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST V for 3.5L GTDI engines. |
| P0709 | Transmission Range Sensor "A" Circuit Intermittent | Engine may not crank, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST J for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST V for 3.5L GTDI engines. |
| P0710 | TFT Sensor "A" Circuit | DTCs P0712 or P0713 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST G for 3.5L Ti-VCT engines or GO to PINPOINT TEST S for 3.5L and 3.7L GTDI engines. |
| P0711 | Transmission Fluid Temperature Sensor "A" Circuit | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST G for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST S for 3.5L GTDI engines. |
| P0712 | Transmission Fluid Temperature Sensor "A" Circuit Low | DTC P0710 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST G for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST S for 3.5L GTDI engines. |
| P0713 | Transmission Fluid Temperature Sensor "A" Circuit High | DTC P0710 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST G for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST S for 3.5L GTDI engines. |
| P0715 | Turbine/Input Shaft Speed Sensor "A" Circuit | DTC P0717 may set, GO to PINPOINT TEST K for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST W for 3.5L GTDI engines. |
| P0717 | Turbine/Input Shaft Speed Sensor "A" Circuit No Signal | DTC P0715 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST K for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST W for 3.5L GTDI engines. |
| P0718 | Turbine/Input Shaft Speed Sensor "A" Circuit Intermittent | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST K for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST W for 3.5L GTDI engines. |
| P0720 | Output Shaft Speed Sensor Circuit | DTC P0722 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST L for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST X for 3.5L GTDI engines. |
| P0721 | Output Shaft Speed Sensor Circuit Range/Performance | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST L for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST X for 3.5L GTDI engines. |
| P0722 | Output Shaft Speed Sensor Circuit No Signal | DTC P0720 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST L for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST X for 3.5L GTDI engines. |
| P0729 | Gear 6 Incorrect Ratio | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0731 | Gear 1 Incorrect Ratio | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0732 | Gear 2 Incorrect Ratio | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0733 | Gear 3 Incorrect Ratio | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0734 | Gear 4 Incorrect Ratio | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0735 | Gear 5 Incorrect Ratio | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0740 | Torque Converter Clutch Solenoid Circuit/Open | DTC P0743 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST H for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST T for 3.5L GTDI engines. |
| P0741 | Torque Converter Clutch Solenoid Circuit Performance/Stuck Off | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0742 | Torque Converter Clutch Solenoid Circuit Stuck On | DTC P0743 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST H for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST T for 3.5L GTDI engines. |
| P0743 | Torque Converter Clutch Solenoid Circuit Electrical | DTCs P0740, P0742 and/or P0744 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST H for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST T for 3.5L GTDI engines. |
| P0744 | Torque Converter Clutch Solenoid Circuit Intermittent | DTC P0743 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST H for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST T for 3.5L GTDI engines. |
| P0748 | Pressure Control Solenoid "A" Electrical | DTCs P0960, P0962 and/or P0963 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST I for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST U for 3.5L GTDI engines. |
| P0750 | Shift Solenoid "A" | DTC P0751 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST A for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST M for 3.5L GTDI engines. |
| P0751 | Shift Solenoid "A" Performance/Stuck Off | DTC P2700 may set, CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0752 | Shift Solenoid "A" Stuck On | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0753 | Shift Solenoid "A" Electrical | DTCs P0750, P0973 and/or P0974 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST A for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST M for 3.5L GTDI engines. |
| P0754 | Shift Solenoid "A" Intermittent | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST A for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST M for 3.5L GTDI engines. |
| P0755 | Shift Solenoid "B" | DTC P0756 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST B for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST N for 3.5L GTDI engines. |
| P0756 | Shift Solenoid "B" Performance/Stuck Off | DTC P2701 may set, CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0757 | Shift Solenoid "B" Stuck On | DTC P2701 may set, CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0758 | Shift Solenoid "B" Electrical | DTCs P0755, P0976 and/or P0977 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST B for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST N for 3.5L GTDI engines. |
| P0759 | Shift Solenoid "B" Intermittent | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST B for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST N for 3.5L GTDI engines. |
| P0760 | Shift Solenoid "C" | DTC P0761 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST C for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST O for 3.5L GTDI engines. |
| P0761 | Shift Solenoid "C" Performance/Stuck Off | DTC P2702 may set, CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0762 | Shift Solenoid "C" Stuck On | DTC P0763 may set, CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0763 | Shift Solenoid "C" Electrical | DTCs P0760, P0979 and/or P0980 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST C for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST O for 3.5L GTDI engines. |
| P0764 | Shift Solenoid "C" Intermittent | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST C for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST O for 3.5L GTDI engines. |
| P0765 | Shift Solenoid "D" | DTC P0766 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST D for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST P for 3.5L GTDI engines. |
| P0766 | Shift Solenoid "D" Performance/Stuck Off | DTC P2704 may set, CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0767 | Shift Solenoid "D" Stuck On | DTCs P07A9 and/or P2704 may set, CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0768 | Shift Solenoid "D" Electrical | DTCs P0765, P0982 and/or P0983 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST D for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST P for 3.5L GTDI engines. |
| P0769 | Shift Solenoid "D" Intermittent | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST D for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST P for 3.5L GTDI engines. |
| P0770 | Shift Solenoid "E" | DTC P0773 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST E for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST Q for 3.5L GTDI engines. |
| P0771 | Shift Solenoid "E" Performance/Stuck Off | DTC P0984 may set, CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0772 | Shift Solenoid "E" Stuck On | DTC P0984 may set, CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0773 | Shift Solenoid "E" Electrical | DTC P0770 may set, GO to PINPOINT TEST E for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST Q for 3.5L GTDI engines. |
| P0774 | Shift Solenoid "E" Intermittent | DTC P0770 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST E for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST Q for 3.5L GTDI engines. |
| P07A5 | Transmission Friction Element "B" Stuck On | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P07A8 | Transmission Friction Element "D" Performance/Stuck Off | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P07A9 | Transmission Friction Element "D" Stuck On | DTC P0767 may set, CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P07AA | Transmission Friction Element "E" Performance/Stuck Off | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0815 | Upshift Switch Circuit | AUTOMATIC TRANSMISSION EXTERNAL CONTROLS - SELECT SWITCH . |
| P0816 | Downshift Switch Circuit | AUTOMATIC TRANSMISSION EXTERNAL CONTROLS - SELECT SWITCH . |
| P0867 | Transmission Fluid Pressure | CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P0960 | Pressure Control Solenoid "A" Control Circuit/Open | DTC P0748 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST I . |
| P0961 | Pressure Control Solenoid "A" Control Circuit Range/Performance | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST I for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST U for 3.5L GTDI engines. |
| P0962 | Pressure Control Solenoid "A" Control Circuit Low | DTC P0748 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST I for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST U for 3.5L GTDI engines. |
| P0963 | Pressure Control Solenoid "A" Control Circuit High | DTC P0748 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST I for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST U for 3.5L GTDI engines. |
| P0973 | Shift Solenoid "A" Control Circuit Low | DTC P0753 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST A for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST M for 3.5L GTDI engines. |
| P0974 | Shift Solenoid "A" Control Circuit High | DTC P0753 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST A for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST M for 3.5L GTDI engines. |
| P0976 | Shift Solenoid "B" Control Circuit Low | DTC P0758 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST B for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST N for 3.5L GTDI engines. |
| P0977 | Shift Solenoid "B" Control Circuit High | DTC P0758 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST B for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST N for 3.5L GTDI engines. |
| P0979 | Shift Solenoid "C" Control Circuit Low | DTC P0763 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST C for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST O for 3.5L GTDI engines. |
| P0980 | Shift Solenoid "C" Control Circuit High | DTC P0763 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST C for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST O for 3.5L GTDI engines. |
| P0982 | Shift Solenoid "D" Control Circuit Low | DTC P0768 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST D for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST P for 3.5L GTDI engines. |
| P0983 | Shift Solenoid "D" Control Circuit High | DTC P0768 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST D for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST P for 3.5L GTDI engines. |
| P0984 | Shift Solenoid "E" Control Circuit Range/Performance | DTCs P0771 and/or P0772 may set. CLEAR the DTC. If the DTCs returns, GO to SYMPTOM CHART . |
| P1001 | KOER Not Able to Complete, KOER Aborted | RETRIEVE and RECORD all DTCs. REPAIR any self-test or CMDTCs first. CLEAR the DTC. If the DTC returns, REPROGRAM the original PCM to the latest calibration. If the DTCs return, INSTALL a new PCM. REFER to the appropriate PCM in REMOVAL AND INSTALLATION . PERFORM the Solenoid Body Strategy Download. REFER to SOLENOID BODY STRATEGY DOWNLOAD . |
| P1397 | System Voltage Out Of Self Test Range | INSPECT the PCM power and ground circuits for opens or short to ground. INSPECT the PCM connector for damaged or pushed-out terminals, corrosion or loose wires. CLEAR the DTC. RERUN the KOEO and KOER self-test. If the DTC returns, REFER to CHARGING SYSTEM . |
| P1501 | Vehicle Speed Sensor Out Of Self Test Range | CLEAR the DTC. If the DTC returns, PLACE selector lever in park and monitor the VSS PID. VERIFY the VSS input is at 0. RERUN self-test procedure. If the DTC returns, REFER to ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL . |
| P1502 | Vehicle Speed Sensor Intermittent | CLEAR the DTC. If the DTC returns, PLACE selector lever in park and monitor the VSS PID. VERIFY the VSS input is at 0. RERUN self-test procedure. If the DTC returns, REFER to ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL . |
| P1636 | Inductive Signature Chip Communication Error | CLEAR the DTC. If the DTC returns, INSTALL a new PCM. REFER to the appropriate PCM in REMOVAL AND INSTALLATION . PERFORM the Solenoid Body Strategy Data Download. REFER to SOLENOID BODY STRATEGY DOWNLOAD . |
| P163E | Transmission Control Module Programming Error | CLEAR the DTC. If the DTC returns, REPROGRAM the PCM to the latest calibration. If the DTC returns, INSTALL a new PCM. REFER to the appropriate PCM in REMOVAL AND INSTALLATION . PERFORM the Solenoid Body Strategy Data Download. REFER to SOLENOID BODY STRATEGY DOWNLOAD . |
| P163F | Transmission ID Block Corrupted, Not Programmed | CLEAR the DTC. If the DTC returns, REPROGRAM the PCM to the latest calibration. If the DTC returns, INSTALL a new PCM. REFER to the appropriate PCM in REMOVAL AND INSTALLATION . PERFORM the Solenoid Body Strategy Data Download. REFER to SOLENOID BODY STRATEGY DOWNLOAD . |
| P1702 | Transmission Range Sensor Circuit Intermittent | DTCs P0706, P0707 and/or P0708 may set, CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST J for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST V for 3.5L GTDI engines. |
| P1705 | Transmission Range Circuit Not Indicating Park/Neutral During Self Test | CLEAR the DTC. RERUN the KOEO and KOER self-test, If the DTC returns, GO to PINPOINT TEST J for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST V for 3.5L GTDI engines. |
| P1711 | Transmission Fluid Temperature Sensor Out Of Self Test Range | CLEAR the DTC. RERUN the KOEO and KOER self-test. |
| P1744 | Torque Converter Clutch Solenoid Circuit Performance | DTC P1744 is a non-electrical DTC. CLEAR the DTC. If the DTCs returns, GO to SYMPTOM CHART . |
| P1780 | Transmission Control Switch (O/D Cancel) Circuit Out Of Self Test Range | AUTOMATIC TRANSMISSION EXTERNAL CONTROLS - COLUMN SHIFT . |
| P1783 | Transmission Overtemperature Condition | MONITOR the TFT sensor PID and TCC PID to VERIFY and MONITOR transmission fluid temperature and TCC solenoid electrical operation. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P1910 | Reverse Lamp Control Circuit/Open | CLEAR the DTC. If the DTC returns, REFER to EXTERIOR LIGHTING SYSTEM . |
| P1921 | Transmission Range Signal | Engine may not crank. DTCs P0706, P0707 and/or P0708 may set. CLEAR the DTC. If the DTC returns, REPAIR the more specific DTC first. GO to PINPOINT TEST J for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST V for 3.5L GTDI engines. |
| P2700 | Transmission Friction Element "A" Apply Time Range/Performance | DTC P2700 is a non-electrical DTC. DTCs P0751 and/or P0752 may set. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART |
| P2701 | Transmission Friction Element "B" Apply Time Range/Performance | DTC P2701 is a non-electrical DTC. DTCs P0756 and/or P0757 may set. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P2702 | Transmission Friction Element "C" Apply Time Range/Performance | DTC P2702 is a non-electrical DTC. DTCs P0761 and/or P0762 may set. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P2703 | Transmission Friction Element "D" Apply Time Range/Performance | DTC P2703 is a non-electrical DTC. DTCs P0766 and/or P0768 may set. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P2704 | Transmission Friction Element "E" Apply Time Range/Performance | DTC P2704 is a non-electrical DTC. DTCs P0771 and/or P0772 may set. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P2705 | Transmission Friction Element "F" Apply Time Range/Performance | DTC P2705 is a non-electrical DTC. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |
| P2760 | Torque Converter Clutch Pressure Control Solenoid Intermittent | CLEAR the DTC. If the DTC returns, GO to PINPOINT TEST H for 3.5L and 3.7L Ti-VCT engines or GO to PINPOINT TEST T for 3.5L GTDI engines. |
| P2783 | Torque Converter Temperature Too High | TCC control valve stuck in the apply position. CLEAR the DTC. If the DTC returns, GO to SYMPTOM CHART . |