FCIM - Premium Plus

DTC CHART: FCIM - PREMIUM PLUS

DTC	Description	Action
B00D5:01	Restraint System Passenger Disable Indicator: General Electrical Failure	CLEAR the DTCs . WAIT 10 seconds. REPEAT the self-test. If DTC B00D5:01 is still present, INSTALL a new FCIM . REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) .
B113C:11	Hazard Switch Illumination: Circuit Short To Ground	CLEAR the DTCs . WAIT 10 seconds. REPEAT the self-test. If DTC B113C:11 is still present, INSTALL a new FCIM . REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) .
B1202:01	Restraint System Passenger Enable Indicator: General Electrical Failure	CLEAR the DTCs . WAIT 10 seconds. REPEAT the self-test. If DTC B1202:01 is still present, INSTALL a new FCIM . REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) .
U0155:00	Lost Communication With IPC Module: No Sub Type Information	GO to PINPOINT TEST AC .
U0423:00	Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information	REFER to INSTRUMENTATION, MESSAGE CENTER AND WARNING CHIMES to RETRIEVE and FOLLOW DTCs present in the IPC .
U2013:63	Switch Pack: Circuit/Component Protection Time-Out	GO to PINPOINT TEST W .
U201A:51	Control Module Main Calibration Data: Not Programmed	DTC U201A:51 sets when the FCIM calibration is missing or corrupted. The INSTALL a new FCIM . REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) .
U3000:41	Control Module: General Checksum Failure	CLEAR the DTCs . WAIT 10 seconds. REPEAT the self-test. If DTC U3000:41 is still present, INSTALL a new FCIM . REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) .
U3000:42	Control Module: General Memory Failure	CLEAR the DTCs . WAIT 10 seconds. REPEAT the self-test. If DTC U3000:42 is still present, INSTALL a new FCIM . REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) .
U3003:16	Battery Voltage: Circuit Voltage Below Threshold	GO to PINPOINT TEST AH .
U3003:17	Battery Voltage: Circuit Voltage Above Threshold	GO to PINPOINT TEST AI .