Parking Aid: PAM
DTC DESCRIPTION - PAM
| DTC | Description | Action |
|---|---|---|
| B129C:12 | Left Front Side Sensor: Circuit Short To Battery | REFER to PINPOINT TEST C . |
| B129C:14 | Left Front Side Sensor: Circuit Short To Ground or Open | REFER to PINPOINT TEST B . |
| B129C:96 | Left Front Side Sensor: Component Internal Failure | REFER to PINPOINT TEST D . |
| B129D:12 | Right Front Side Sensor: Circuit Short To Battery | REFER to PINPOINT TEST C . |
| B129D:14 | Right Front Side Sensor: Circuit Short To Ground or Open | REFER to PINPOINT TEST B . |
| B129D:96 | Right Front Side Sensor: Component Internal Failure | REFER to PINPOINT TEST D . |
| B1303:11 | Park Assist Switch: Circuit Short To Ground | REFER to PINPOINT TEST E . |
| B1304:68 | Electronic Power Assisted Steering System: Event Information | RETRIEVE and FOLLOW all PSCM DTCs . |
| B1B44:12 | Right Rear Outer Sensor: Circuit Short To Battery | GO to PINPOINT TEST C . |
| B1B44:14 | Right Rear Outer Sensor: Circuit Short To Ground or Open | GO to PINPOINT TEST B . |
| B1B44:96 | Right Rear Outer Sensor: Component Internal Failure | GO to PINPOINT TEST D . |
| B1B46:12 | Right Rear Inner Sensor: Circuit Short To Battery | GO to PINPOINT TEST C . |
| B1B46:14 | Right Rear Inner Sensor: Circuit Short To Ground or Open | GO to PINPOINT TEST B . |
| B1B46:96 | Right Rear Inner Sensor: Component Internal Failure | GO to PINPOINT TEST D . |
| B1B48:12 | Left Rear Outer Sensor: Circuit Short To Battery | GO to PINPOINT TEST C . |
| B1B48:14 | Left Rear Outer Sensor: Circuit Short To Ground or Open | GO to PINPOINT TEST B . |
| B1B48:96 | Left Rear Outer Sensor: Component Internal Failure | GO to PINPOINT TEST D . |
| B1B50:12 | Left Rear Inner Sensor: Circuit Short To Battery | GO to PINPOINT TEST C . |
| B1B50:14 | Left Rear Inner Sensor: Circuit Short To Ground or Open | GO to PINPOINT TEST B . |
| B1B50:96 | Left Rear Inner Sensor: Component Internal Failure | GO to PINPOINT TEST D . |
| B1B52:12 | Rear Sounder-Park Aid: Circuit Short To Battery | GO to PINPOINT TEST F . |
| B1B52:14 | Rear Sounder-Park Aid: Circuit Short To Ground or Open | GO to PINPOINT TEST F . |
| B1B58:11 | Rear Sensors Power Circuit: Circuit Short To Ground | GO to PINPOINT TEST E . |
| P1603:55 | EEPROM Malfunction: Not Configured | CHECK the vehicle service history for recent service actions related to this module. This DTC
sets due to incomplete or incorrect PMI
procedures. If there have been recent service actions with this module, REPEAT the PMI
procedure as directed by the scan tool (REFER to
MODULE CONFIGURATION
, PMI
for further information). If there have been no recent service actions, INSTALL a new module to correct the failure to retain configuration data. Refer to PARKING AID MODULE (PAM) . |
| U0100:00 | Lost Communication With ECM/PCM "A": No Sub Type Information | REFER to PINPOINT TEST I . |
| U0101:00 | Lost Communication with TCM: No Sub Type Information | REFER to PINPOINT TEST J . |
| U0121:00 | Lost Communication With Anti-Lock Brake System (ABS) Control Module: No Sub Type Information | REFER to PINPOINT TEST K . |
| U0131:00 | Lost Communication With Power Steering Control Module: No Sub Type Information | REFER to PINPOINT TEST L . |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to PINPOINT TEST AB . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | REFER to PINPOINT TEST M . |
| U0212:00 | Lost Communication With Steering Column Control Module: No Sub Type Information | REFER to PINPOINT TEST N . |
| U0401:00 | Invalid Data Received from ECM/PCM A: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the PCM with a faulted signal data input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. |
| U0402:00 | Invalid Data Received from TCM: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the PCM with a faulted signal data input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. |
| U0415:00 | Invalid Data Received From Anti-Lock Brake System (ABS) Control Module: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the ABS module with a faulted signal data input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. |
| U0420:00 | Invalid Data Received From Power Steering Control Module: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the PSCM with a faulted signal data input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the BCM with a faulted signal data input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. |
| U0423:00 | Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the IPC with a faulted signal data input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. |
| U0429:68 | Invalid Data Received From Steering Column Control Module: Event Information | This DTC sets when the PAM receives invalid network data from the Steering Column Control Module (SCCM) with a faulted signal data input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. |
| U2024:41 | Control Module Cal-Config Data: General Checksum Failure | CHECK the vehicle service history for recent service actions related to this module. This DTC
sets due to incomplete or incorrect PMI
procedures. If there have been recent service actions with this module, REPEAT the PMI
procedure as directed by the scan tool. If there have been no recent service actions, INSTALL a new module to correct the failure to retain configuration data. Refer to PARKING AID MODULE (PAM) . |
| U2024:42 | Control Module Cal-Config Data: General Memory Failure | CHECK the vehicle service history for recent service actions related to this module. This DTC
sets due to incomplete or incorrect PMI
procedures. If there have been recent service actions with this module, REPEAT the PMI
procedure as directed by the scan tool. If there have been no recent service actions, INSTALL a new module to correct the failure to retain configuration data. Refer to PARKING AID MODULE (PAM) . |