LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Explorer Police Interceptor, FWD >> Repair and Diagnosis >> Quick Lookups >> DTC Index >> Information System And Entertainment System DTCS >> Premium >> FCDIM - Premium
April 5, 2026: LEMON Manuals is launched! Read the announcement.

FCDIM - Premium

DTC CHART: FCDIM - PREMIUM

DTC Description Action
U0155:00 Lost Communication With IPC  Module: No Sub Type Information GO to PINPOINT TEST Y .
U0184:00 Lost Communication With Radio: No Sub Type Information GO to PINPOINT TEST Z .
U0253:00 Lost Communication With Accessory Protocol Interface Module: No Sub Type Information GO to PINPOINT TEST AA .
U0256:00 Lost Communication With Front Controls Interface Module: No Sub Type Information GO to PINPOINT TEST AB .
U201A:51 Control Module Main Calibration Data: Not Programmed
  • This DTC sets due to incomplete or incorrect PMI  procedures. CHECK the vehicle service history for recent service actions related to the FCDIM  .
  • If there have been recent service actions with the FCDIM  , REPEAT/PERFORM the PMI  procedure as directed by the diagnostic scan tool. REFER to Programmable Module Installation (PMI) in MODULE CONFIGURATION SYSTEM .
  • If there have been no recent service actions, INSTALL a new FCDIM  to correct the failure to retain configuration data. REFER to FRONT CONTROLS/DISPLAY INTERFACE MODULE (FCDIM) .
U2100:00 Initial Configuration Not Complete: No Sub Type Information
  • This DTC sets due to incomplete or incorrect PMI  procedures. CHECK the vehicle service history for recent service actions related to the FCDIM  .
  • If there have been recent service actions with the FCDIM  , REPEAT/PERFORM the PMI  procedure as directed by the diagnostic scan tool. REFER to Programmable Module Installation (PMI) in MODULE CONFIGURATION SYSTEM .
  • If there have been no recent service actions, INSTALL a new FCDIM  to correct the failure to retain configuration data. REFER to FRONT CONTROLS/DISPLAY INTERFACE MODULE (FCDIM) .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information
  • This DTC sets due to incomplete or incorrect PMI  procedures. CHECK the vehicle service history for recent service actions related to the FCDIM  .
  • If there have been recent service actions with the FCDIM  , REPEAT/PERFORM the PMI  procedure as directed by the diagnostic scan tool. REFER to Programmable Module Installation (PMI) in MODULE CONFIGURATION SYSTEM .
  • If there have been no recent service actions, INSTALL a new FCDIM to correct the failure to retain configuration data. REFER to FRONT CONTROLS/DISPLAY INTERFACE MODULE (FCDIM) .
U3000:41 Control Module: General Checksum Failure CLEAR the DTCs  . WAIT 10 seconds. REPEAT the self-test. If DTC  U3000:41 is still present, INSTALL a new FCDIM  . Refer to FRONT CONTROLS/DISPLAY INTERFACE MODULE (FCDIM) .
U3000:42 Control Module: General Memory Failure CLEAR the DTCs  . WAIT 10 seconds. REPEAT the self-test. If DTC  U3000:42 is still present, INSTALL a new FCDIM  . Refer to FRONT CONTROLS/DISPLAY INTERFACE MODULE (FCDIM) .
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to PINPOINT TEST AD .
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to PINPOINT TEST AE .
scientia non olet · About LEMON Manuals