Sod-L And Sod-R
DTC DESCRIPTION - SOD-L AND SOD-R
| DTC | Description | Action |
|---|---|---|
| B11D6:11 | Driver Display Alert LED: Circuit Short To Ground | GO to PINPOINT TEST D . |
| B11D6:15 | Driver Display Alert LED: Circuit Short To Battery Or Open | GO to PINPOINT TEST D . |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to PINPOINT TEST J . |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | This DTC sets when the SOD-L or SOD-R receive invalid network data from the BCM with a faulted signal data input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or improper PMI procedures. If there have been recent service actions with this module, REPEAT the PMI procedure as directed by the scan tool (REFER to MODULE CONFIGURATION , PMI for further information). If there have been no recent service actions, INSTALL a new module to correct the failure to retain configuration data. |
| U3000:44 | Control Module: Data Failure | GO to PINPOINT TEST H . |
| U3000:45 | Control Module: Program Memory Failure | GO to PINPOINT TEST H . |
| U3000:46 | Control Module: Calibration/Parameter Memory Failure | GO to PINPOINT TEST H . |
| U3000:48 | Control Module: Supervision Software Failure | GO to PINPOINT TEST H . |
| U3000:49 | Control Module: Internal Electronic Failure | GO to PINPOINT TEST H . |
| U3000:4A | Control Module: Incorrect Component Installed | GO to PINPOINT TEST H . |