Wiper System And Washer System DTCS
STEERING COLUMN CONTROL MODULE (SCCM) DTC CHART
| DTC | Description | Action |
|---|---|---|
| B1008:09 | Wiper Mode Switch: Component Failure | INSTALL a new multifunction switch. REFER to STEERING COLUMN SWITCHES . CLEAR the DTCs and REPEAT the self-test. If the DTC is retrieved again, INSTALL a new SCCM. REFER to STEERING COLUMN SWITCHES . |
| B1051:09 | Front Washer Switch: Component Failure | INSTALL a new multifunction switch. REFER to STEERING COLUMN SWITCHES . CLEAR the DTCs and REPEAT the self-test. If the DTC is retrieved again, INSTALL a new SCCM. REFER to STEERING COLUMN SWITCHES . |
| B10AD:02 | Rain Sensor: General Signal Failure | GO to PINPOINT TEST E . |
| B10AD:08 | Rain Sensor: Bus Signal / Message Failure | GO to PINPOINT TEST E . |
| B10AD:49 | Rain Sensor: Internal Electronic Failure | INSTALL a new rain sensor. REFER to RAIN SENSOR . CLEAR the DTCs. REPEAT the self-test. |
| B1131:02 | Wiper Motor Module: General Signal Failure | GO to PINPOINT TEST B . |
| B1131:08 | Wiper Motor Module: Bus Signal / Message Failure | GO to PINPOINT TEST B . |
| B12F7:09 | Single Wipe Switch: Component Failure | INSTALL a new multifunction switch. REFER to STEERING COLUMN SWITCHES . CLEAR the DTCs and REPEAT the self-test. If the DTC is retrieved again, INSTALL a new SCCM. REFER to STEERING COLUMN SWITCHES . |
| All other DTCs | - | REFER to STEERING COLUMN SWITCHES . |