Front Control/Display Interface Module (FCDIM)
FRONT CONTROL/DISPLAY INTERFACE MODULE (FCDIM) DTC CHART
| DTC | Description | Action |
|---|---|---|
| B10BD:11 | Multifunctional Switch: Circuit Short to Ground | GO to PINPOINT TEST D . |
| B10BD:13 | Multifunctional Switch: Circuit Open | GO to PINPOINT TEST D . |
| B10BD:23 | Multifunctional Switch: Signal Stuck Low | GO to PINPOINT TEST D . |
| U0010:88 | Medium Speed CAN Communication Bus: Bus Off | REFER to MODULE COMMUNICATIONS NETWORK . |
| U0074:88 | Control Module Communication Bus "B" Off: Bus Off | REFER to MODULE COMMUNICATIONS NETWORK . |
| U1A00:00 | Private Communication Network: No Sub Type Information | GO to PINPOINT TEST Y . |
| U0140:00 | Lost Communication With The BCM: No Sub Type Information | GO to PINPOINT TEST P . |
| U0155:00 | Lost Communication With The IPC Module: No Sub Type Information | GO to PINPOINT TEST U . |
| U0193:00 | Lost Communication With Digital Audio Control Module A: No Sub Type Information | GO to PINPOINT TEST X . |
| U0423:68 | Invalid Data Received From Instrument Panel Control Module: Event Information | RETRIEVE and FOLLOW other DTCs present in the FCDIM or IPC. |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information |
|
| U3000:00 | Control Module: No Sub Type Information | INSTALL a new FCDIM. REFER to FRONT CONTROLS/DISPLAY INTERFACE MODULE (FCDIM) . TEST the system for normal operation. |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to PINPOINT TEST AE . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to PINPOINT TEST AF . |