ABS Module

The ABS module is attached directly to the HCU and is the ECU for all of the ABS and stability control systems. The module monitors all sensor inputs and all HS-CAN messages that relate to ABS and stability control and then directly controls the solenoid valves and the hydraulic pump motor.

The ABS module is available separately for service, however, the module is serviced with the HCU in the event that a new HCU is required. When a new ABS module is installed, whether with a new HCU or not, the module must be programmed with the vehicle information. For additional information on module programming, refer to MODULE CONFIGURATION .