| 42 |
CLEAR the DTC and REPEAT the self-test. If the DTC returns, INSTALL a new EPAS gear. REFER to Steering Gear |
| 46 |
GO to PINPOINT TEST B |
| 49 |
GO to PINPOINT TEST B |
| 53 |
INSTALL a new EPAS gear. REFER to Steering Gear
. TEST the system for normal operation. |
| 56 |
ADDRESS all other PSCM DTCs before progressing. If no other DTCs are present CLEAR this DTC and CYCLE the ignition OFF and ON. REPEAT self-test. |
| 96 |
GO to PINPOINT TEST C |
| 4B |
DIAGNOSE all other PSCM DTCs before addressing this concern. If no other DTCs are present, CHECK and ADJUST the tire pressures as necessary. If the tire pressures are OK, ADVISE the customer on vehicle operation under heavy loads as described in Diagnostic Aids. |