DTC P0602: Powertrain Control Module Programming Error
DTC P0602: POWERTRAIN CONTROL MODULE PROGRAMMING ERROR
| Description: | This DTC sets when a programming error within the vehicle identification (VID) block is detected. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The VID block must be programmed. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the VID Block For A Replacement PCM. If the PCM does not allow reprogramming of the VID block, reflashing of the PCM is required. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. Refer to the appropriate articles related to the description, possible causes and diagnostic aids. |
||