Module Configuration and Parameter Chart

WARNING: This page is about a different variant/trim than selected.

The chart describes specific module configuration information:

Module Name	Programmable Module Installation (PMI) Available	Reprogram/Flash Capable	Requires Adaptive Learning or Calibration	Available Progammable Parameters
APIM	Yes	Yes	No	None
ABS module	Yes	Yes	IVD initialization	None
ACM	Yes	Yes	No	Radio presets
BCM	Yes	Yes	Ambient lighting calibration Rear view camera calibration	DRL configuration Remote start enable/disable Trim switch enable/disable
CCM	Yes	Yes	No	None
DSP	Yes	Yes	No	None
DC /DC Converter Control Module (Voltage Quality Module)	Yes	Yes	No	None
DDM	Yes	Yes	No	None
DSM	Yes	Yes	No	None
FCIM	Yes	Yes	No	None
FCDIM (4.2-inch screen)	Yes	Yes	No	None
GWM	Yes	Yes	No	None
GPSM	Yes	Yes	No	None
HUD Module	No	No	No	None
IPMA	Yes	Yes	Camera calibration	None
IPC	Yes	Yes	No	Automatic engine ignition shutdown (AEIS) with override Driver Beltminder Mid-passenger Beltminder Passenger Beltminder Remote start enable/disable climate settings driver seat passenger seat rear defrost
OCSM	No	No	OCSM re-zero	None
PAM (integrated with BCM )	Yes	Yes	No	None
PSCM	Yes	Yes	No	None
PCM	No	Yes	No	None
PDM	Yes	Yes	No	None
RTM	Yes	Yes	No	None
RCM	Yes	Yes	No	None
SODL	Yes	Yes	No	Blockage enabled Enable/disable configuration
SODR	Yes	Yes	No	Blockage enabled Enable/disable configuration
SCCM	Yes	Yes	No	None