Engine Control Components - 5.8L (4V): KS
NOTE:
Note the position and orientation of each KS. The sensors must be installed in the same position as removed or damage to the sensors may occur.
NOTE:
The intake manifold must be removed to perform this procedure. Refer to
ENGINE - 5.8L (4V)
.
| Item | Part Number | Description |
|---|---|---|
| 1 | - | KS harness electrical connector (part of 14B485) |
| 2 | - | Pin-type retainer (part of 14B485) |
| 3 | - | Pin-type retainer (part of 14B485) |
| 4 | - | KS electrical connector (part of 14B485) (2 required) |
| 5 | W500225 | KS bolt (2 required) |
| 6 | 12A699 | KS (2 required) |
- Refer to the procedures and/or exploded views for any Warnings, Notices, Notes, Materials, Specifications, and Special Tools. Items in the exploded views may not be listed in order of removal.