Parking Aid System (Visual) DTCS: BCM
BCM DTC CHART
| DTC | Description | Action |
|---|---|---|
| B115E:01 | Camera Module: General Electrical Failure | DTC B115E:01 sets in the BCM when the video camera status indicates corrupted data with in the video camera. CLEAR the DTCs. REPEAT the self-test. If DTC B115E:01 is retrieved again, INSTALL a new video camera. REFER to Video Camera . |
| B115E:08 | Camera Module: Bus Signal/Message Failure | GO to Pinpoint Test A . |
| B115E:49 | Camera Module: Internal Electronic Failure | CLEAR the DTCs. REPEAT the self-test. If DTC B115E:49 is retrieved again, INSTALL a new video camera. REFER to Video Camera . |
| B115E:55 | Camera Module: Not Configured | DTC B115E:55 sets in the BCM when the video camera is not configured. The video camera needs to be configured through the BCM. CARRY OUT the video camera configuration using a scan tool under Body > RVC configuration. |
| All other DTCs | - | REFER to the DTC Charts in MULTIFUNCTION ELECTRONIC MODULES . |