DTC P0602: Powertrain Control Module Programming Error
WARNING: This page is about a different variant/trim than selected.
DTC P0602: POWERTRAIN CONTROL MODULE PROGRAMMING ERROR
| Description: | This DTC indicates a programming error within the vehicle identification (VID) block. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Program the VID block. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Making Changes to the VID Block. If the PCM does not allow reprogramming of the VID block, reflashing of the PCM is required. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the appropriate Description article, Possible Causes and Diagnostic Aids for the DTC. | ||