Anti-Theft System - Passive Anti-Theft System (Push Button Start) DTCS: BCM
BCM DTC DESCRIPTION
| DTC | Description | Action |
|---|---|---|
| B10D5:94 | PATS Antenna: Unexpected Operation | The BCM
received an incomplete or corrupt response from the PATS
transceiver. INSTALL a new PATS transceiver. REFER to: Passive Anti-Theft System (PATS) Transceiver . |
| B10D7:05 | PATS Key: System Programming Failure | GO to PINPOINT TEST D |
| B10D7:81 | PATS Key: Invalid Serial Data Received | GO to PINPOINT TEST E |
| B10D7:87 | PATS Key: Missing Message | GO to PINPOINT TEST F |
| B10D8:00 | PATS Key Less Than Minimum Programmed: No Sub Type Information | Less than 2 keys are programmed. PROGRAM additional keys (minimum of 2 keys must be programmed). REFER to: KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT . |
| B10DA:51 | PATS Target Identifier: Not Programmed | There is an unprogrammed key. PROGRAM the key. REFER to: KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT . |
| B11CC:51 | Immobiliser Keyless Vehicle Secret Key: Not Programmed | There is no RFA
module ID stored in the BCM. CARRY OUT a parameter reset. REFER to: PASSIVE ANTI-THEFT SYSTEM (PATS) PARAMETER RESET . |
| B1399:05 | Personalized Key Synchronization: System Programming Failure | ERASE and PROGRAM all of the customer's keys. REFER to: ERASE ALL KEYS AND KEY PROGRAMMING . |
| For all other DTCs | - | REFER to: BODY CONTROL MODULE (BCM) . |