Parking Aid Module (PAM)
PAM DTC DESCRIPTION
| DTC | Description | Action |
|---|---|---|
| B129C:12 | Left Front Side Sensor: Circuit Short To Battery | REFER to: PARKING AID . |
| B129C:14 | Left Front Side Sensor: Circuit Short To Ground Or Open | REFER to: PARKING AID . |
| B129C:96 | Left Front Side Sensor: Component Internal Failure | REFER to: PARKING AID . |
| B129D:12 | Right Front Side Sensor: Circuit Short To Battery | REFER to: PARKING AID . |
| B129D:14 | Right Front Side Sensor: Circuit Short To Ground Or Open | REFER to: PARKING AID . |
| B129D:96 | Right Front Side Sensor: Component Internal Failure | REFER to: PARKING AID . |
| B129E:73 | Enable/Disable Switch - Semi-Automatic Advanced Parallel Park: Actuator Stuck Closed | REFER to: PARKING AID . |
| B129F:11 | Function LED - Semi-Automatic Advanced Parallel Park: Circuit Short To Ground | REFER to: PARKING AID . |
| B129F:12 | Function LED - Semi-Automatic Parallel Park: Circuit Short To Battery | REFER to: PARKING AID . |
| B13B5:12 | Rear Center Sensor: Circuit Short To Battery | GO to PINPOINT TEST E |
| B13B5:14 | Rear Center Sensor: Circuit Short To Ground Or Open | GO to PINPOINT TEST D |
| B13B5:96 | Rear Center Sensor: Component Internal Failure | GO to PINPOINT TEST F |
| B1B36:12 | Right Front Outer Sensor: Circuit Short To Battery | GO to PINPOINT TEST G |
| B1B36:14 | Right Front Outer Sensor: Circuit Short To Ground Or Open | GO to PINPOINT TEST H |
| B1B36:96 | Right Front Outer Sensor: Component Internal Failure | GO to PINPOINT TEST I |
| B1B38:12 | Right Front Inner Sensor: Circuit Short To Battery | GO to PINPOINT TEST G |
| B1B38:14 | Right Front Inner Sensor: Circuit Short To Ground Or Open | GO to PINPOINT TEST H |
| B1B38:96 | Right Front Inner Sensor: Component Internal Failure | GO to PINPOINT TEST I |
| B1B40:12 | Left Front Outer Sensor: Circuit Short To Battery | GO to PINPOINT TEST G |
| B1B40:14 | Left Front Outer Sensor: Circuit Short To Ground Or Open | GO to PINPOINT TEST H |
| B1B40:96 | Left Front Outer Sensor: Component Internal Failure | GO to PINPOINT TEST I |
| B1B42:12 | Left Front Inner Sensor: Circuit Short To Battery | GO to PINPOINT TEST G |
| B1B42:14 | Left Front Inner Sensor: Circuit Short To Ground Or Open | GO to PINPOINT TEST H |
| B1B42:96 | Left Front Inner Sensor: Component Internal Failure | GO to PINPOINT TEST I |
| B1B44:12 | Right Rear Outer Sensor: Circuit Short To Battery | GO to PINPOINT TEST E |
| B1B44:14 | Right Rear Outer Sensor: Circuit Short To Ground Or Open | GO to PINPOINT TEST D |
| B1B44:96 | Right Rear Outer Sensor: Component Internal Failure | GO to PINPOINT TEST F |
| B1B48:12 | Left Rear Outer Sensor: Circuit Short To Battery | GO to PINPOINT TEST E |
| B1B48:14 | Left Rear Outer Sensor: Circuit Short To Ground Or Open | GO to PINPOINT TEST D |
| B1B48:96 | Left Rear Outer Sensor: Component Internal Failure | GO to PINPOINT TEST F |
| B1B54:11 | Function LED - Park Aid: Circuit Short To Ground | GO to PINPOINT TEST J |
| B1B54:12 | Function LED - Park Aid: Circuit Short To Battery | GO to PINPOINT TEST J |
| B1B57:11 | Front Sensors Power Circuit: Circuit Short To Ground | GO to PINPOINT TEST B |
| B1B58:11 | Rear Sensors Power Circuit: Circuit Short To Ground | GO to PINPOINT TEST C |
| B1C30:73 | Disable Switch - Park Aid: Actuator Stuck Closed | GO to PINPOINT TEST K |
| U0001:88 | High Speed Can Communication Bus: Bus Off | The module could not communicate on the network at a point in time. The fault is not currently present (the module had to communicate with the scan tool to report this DTC ). CLEAR the DTC . REPEAT the Network Test with the scan tool. VERIFY the integrity of the connectors and wiring. Refer to MODULE COMMUNICATIONS NETWORK for schematic and connector information. |
| U0100:87 | Lost Communication With ECM/PCM "A": Missing Message | GO to PINPOINT TEST L |
| U0101:87 | Lost Communication With TCM: Missing Message | GO to PINPOINT TEST M |
| U0121:87 | Lost Communication With Anti-Lock Brake System (ABS) Control Module: Missing Message | GO to PINPOINT TEST N |
| U0126:87 | Lost Communication With Steering Angle Sensor Module: Missing Message | GO to PINPOINT TEST O |
| U0131:87 | Lost Communication With Power Steering Control Module: Missing Message | GO to PINPOINT TEST P |
| U0140:87 | Lost Communication With Body Control Module: Missing Message | GO to PINPOINT TEST Q |
| U0300:00 | Internal Control Module Software Incompatibility: No Sub Type Information | CLEAR the DTC
and REPEAT the self-test. If the DTC
returns, INSTALL a new Parking Aid Module (PAM). REFER to: PARKING ASSIST CONTROL MODULE (PAM) . |
| U0401:86 | Invalid Data Received From ECM/PCM A: Signal Invalid | This DTC sets when the Parking Aid Module (PAM) receives invalid network data from the PCM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0402:86 | Invalid Data Received From TCM: Signal Invalid | This DTC sets when the Parking Aid Module (PAM) receives invalid network data from the SOBDMC with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0415:86 | Invalid Data Received From ABS Control Module: Signal Invalid | This DTC sets when the Parking Aid Module (PAM) receives invalid network data from the ABS module with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0420:86 | Invalid Data Received From Power Steering Control Module: Signal Invalid | This DTC sets when the Parking Aid Module (PAM) receives invalid network data from the PSCM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0422:86 | Invalid Data Received From Body Control Module: Signal Invalid | This DTC sets when the Parking Aid Module (PAM) receives invalid network data from the BCM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0428:86 | Invalid Data Received From Steering Angle Sensor Module: Signal Invalid | This DTC sets when the Parking Aid Module (PAM) receives invalid network data from the SASM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U100B:67 | Semi-Automatic Parallel Parking System: Signal Incorrect After Event | This DTC sets when the Parking Aid Module (PAM) detects a fault after an active park assist event. RETRIEVE and REPAIR all other Parking Aid Module (PAM) Diagnostic Trouble Codes (DTCs). |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CLEAR the DTC
and REPEAT the self-test. If the DTC
returns, INSTALL a new Parking Aid Module (PAM). REFER to: PARKING ASSIST CONTROL MODULE (PAM) . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | CLEAR the DTC
and REPEAT the self-test. If the DTC
returns, INSTALL a new Parking Aid Module (PAM). REFER to: PARKING ASSIST CONTROL MODULE (PAM) . |
| U3000:47 | Control Module: Watchdog/Safety Microcontroller Failure | CLEAR the DTC
and REPEAT the self-test. If the DTC
returns, INSTALL a new Parking Aid Module (PAM). REFER to: PARKING ASSIST CONTROL MODULE (PAM) . |
| U3000:49 | Control Module: Internal Electronic Failure | CLEAR the DTC
and REPEAT the self-test. If the DTC
returns, INSTALL a new Parking Aid Module (PAM). REFER to: PARKING ASSIST CONTROL MODULE (PAM) . |
| U3000:55 | Control Module: Not Configured | This DTC
sets due to incomplete Parking Aid Module (PAM) programming. CLEAR the DTC
and leave the ignition ON for 5 minutes. REPEAT the self-test. If the DTC
returns, INSTALL a new Parking Aid Module (PAM). REFER to: PARKING ASSIST CONTROL MODULE (PAM) . |
| U3003:62 | Battery Voltage: Signal Compare Failure | GO to PINPOINT TEST R |