Anti-Lock Brake System And Stability Control DTCS: SOBDMC

DTC INDEX

DTC	Description	Action
C0001:00	TCS Control Channel "A" Valve 1: No Sub Type Information	Using a diagnostic scan tool, CARRY OUT the ABS module self-test. RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). REFER to the DTC CHART: ABS MODULE .
C0002:00	TCS Control Channel "A" Valve 2: No Sub Type Information	Using a diagnostic scan tool, CARRY OUT the ABS module self-test. RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). REFER to the DTC CHART: ABS MODULE .
C0003:00	TCS Control Channel "B" Valve 1: No Sub Type Information	Using a diagnostic scan tool, CARRY OUT the ABS module self-test. RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). REFER to the DTC CHART: ABS MODULE .
C0004:00	TCS Control Channel "B" Valve 2: No Sub Type Information	Using a diagnostic scan tool, CARRY OUT the ABS module self-test. RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). REFER to the DTC CHART: ABS MODULE .
C0021:00	Brake Booster Performance: No Sub Type Information	Using a diagnostic scan tool, RETRIEVE and RECORD all ABS module Diagnostic Trouble Codes (DTCs). If ABS module DTC C0021:21, C0021:66 or C0021:77 is also present, GO to PINPOINT TEST N If ABS module DTC C1015:64 is also present, GO to PINPOINT TEST X If ABS module Diagnostic Trouble Codes (DTCs) C0021:XX and C1015:64 are present, GO to PINPOINT TEST X
C052B:00	ABS Pump Motor Control Range/Performance: No Sub Type Information	GO to PINPOINT TEST H
C052C:00	ABS Pump Motor Control Circuit/Open: No Sub Type Information	GO to PINPOINT TEST H
C052D:00	ABS Pump Motor Control Circuit High: No Sub Type Information	GO to PINPOINT TEST H
C052E:00	ABS Pump Motor Control Circuit Low: No Sub Type Information	Using a diagnostic scan tool, CARRY OUT the ABS module self-test. RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). REFER to the DTC CHART: ABS MODULE .
C053D:00	Brake Pressure Sensor "A" Range/Performance: No Sub Type Information	CLEAR the DTC . CYCLE the ignition from ON to OFF and back to ON. REPEAT the self-test. If DTC C053D:00 returns, VERIFY all ABS module-to-HCU fasteners are tightened to 2 Nm (18 lb-in). If all fasteners are tightened to their correct torque specifications, INSTALL a new ABS module and HCU assembly. REFER to: Hydraulic Control Unit (HCU) . Using a diagnostic scan tool, CLEAR the SOBDMC Diagnostic Trouble Codes (DTCs).
C0541:00	Brake Pressure Sensor "B" Range/Performance: No Sub Type Information	CLEAR the DTC . CYCLE the ignition from ON to OFF and back to ON. REPEAT the self-test. If DTC C0541:00 returns, VERIFY all ABS module-to-HCU fasteners are tightened to 2 Nm (18 lb-in). If all fasteners are tightened to their correct torque specifications, INSTALL a new ABS module and HCU assembly. REFER to: Hydraulic Control Unit (HCU) . Using a diagnostic scan tool, CLEAR the SOBDMC Diagnostic Trouble Codes (DTCs).
C0560:00	Brake Pressure Sensor Missing Calibration: No Sub Type Information	CLEAR the DTC . CYCLE the ignition from ON to OFF and back to ON. REPEAT the self-test. If DTC C0560:00 returns, VERIFY all ABS module-to-HCU fasteners are tightened to 2 Nm (18 lb-in). If all fasteners are tightened to their correct torque specifications, INSTALL a new ABS module and HCU assembly. REFER to: Hydraulic Control Unit (HCU) . Using a diagnostic scan tool, CLEAR the SOBDMC Diagnostic Trouble Codes (DTCs).
C0563:00	ABS Control Module Performance: No Sub Type Information	Using a diagnostic scan tool, CARRY OUT the ABS module self-test. RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). REFER to the DTC CHART: ABS MODULE .
C0564:00	ABS Control Module System Voltage Low: No Sub Type Information	GO to PINPOINT TEST A
C0565:00	ABS Control Module System Voltage High: No Sub Type Information	GO to PINPOINT TEST F
C0566:00	Brake Booster Solenoid Circuit/Open: No Sub Type Information	GO to PINPOINT TEST J
C0567:00	Brake Booster Solenoid Circuit Low: No Sub Type Information	GO to PINPOINT TEST J
C0568:00	Brake Booster Solenoid Circuit High: No Sub Type Information	GO to PINPOINT TEST J
C0569:00	Brake Booster Solenoid Circuit Performance: No Sub Type Information	GO to PINPOINT TEST J
C056A:00	Brake Booster Pressure Sensor Power Supply Circuit: No Sub Type Information	The brake system pressure sensor is supplied voltage by the ABS module. The ABS module monitors this output and sets a DTC when the voltage is out or range. DIAGNOSE Diagnostic Trouble Codes (DTCs) C0564:00 and C0565:00 before diagnosing C056A:00. If DTC C0564:00 or C0565:00 is not present, VERIFY all ABS module-to-HCU fasteners are tightened to 2 Nm (18 lb-in). If all fasteners are tightened to their correct torque specifications, INSTALL a new ABS module and HCU assembly. REFER to: Hydraulic Control Unit (HCU) . Using a diagnostic scan tool, CLEAR the SOBDMC Diagnostic Trouble Codes (DTCs).
C056B:00	Brake Pressure Sensor "A" Intermittent/Erratic: No Sub Type Information	Using a diagnostic scan tool, CARRY OUT the ABS module self-test. RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). REFER to the DTC CHART: ABS MODULE .
C056D:00	Brake Pedal Position Sensor Supply Voltage Circuit Low: No Sub Type Information	GO to PINPOINT TEST S
C056E:00	Brake Pedal Position Sensor Supply Voltage Circuit High: No Sub Type Information	GO to PINPOINT TEST S
P050F:00	Brake Assist Vacuum Too Low: No Sub Type Information	GO to PINPOINT TEST X
P057A:00	Brake Pedal Position Sensor "A" Circuit/Open: No Sub Type Information	GO to PINPOINT TEST S
P057B:00	Brake Pedal Position Sensor "A" Circuit Range/Performance: No Sub Type Information	GO to PINPOINT TEST S
P057C:00	Brake Pedal Position Sensor "A" Circuit Low: No Sub Type Information	GO to PINPOINT TEST S
P057D:00	Brake Pedal Position Sensor "A" Circuit High: No Sub Type Information	GO to PINPOINT TEST S
P057E:00	Brake Pedal Position Sensor "A" Circuit Intermittent/Erratic: No Sub Type Information	GO to PINPOINT TEST S
P05DB:00	Brake Pedal Position Sensor "B" Circuit/Open: No Sub Type Information	GO to PINPOINT TEST S
P05DC:00	Brake Pedal Position Sensor "B" Circuit Range/Performance: No Sub Type Information	GO to PINPOINT TEST S
P05DD:00	Brake Pedal Position Sensor "B" Circuit Low: No Sub Type Information	GO to PINPOINT TEST S
P05DE:00	Brake Pedal Position Sensor "B" Circuit High: No Sub Type Information	GO to PINPOINT TEST S
P05E0:00	Brake Pedal Position Sensor "A"/"B" Correlation: No Sub Type Information	GO to PINPOINT TEST S
P258B:00	Vacuum Pump Control Circuit "A" Range/Performance: No Sub Type Information	GO to PINPOINT TEST T
U1025:00	ABS Control Module Communication Bus Off: No Sub Type Information	The ABS module could not communicate on the network at a point in time. The fault is not currently present since the module had to communicate with the diagnostic scan tool to report this DTC . VERIFY the integrity of the connectors and wiring. Refer to MODULE COMMUNICATIONS NETWORK for schematic and connector information. DIAGNOSE no HS-CAN communication, all modules are not responding. REFER to: COMMUNICATIONS NETWORK .
U1026:00	ABS Control Module Lost Communication with Hybrid/EV Powertrain Control Module: No Sub Type Information	GO to PINPOINT TEST AA
U1027:00	ABS Control Module Lost Communication With ECM/PCM "A": No Sub Type Information	GO to PINPOINT TEST I
U1028:00	ABS Control Module Received Invalid Data From ECM/PCM "A": No Sub Type Information	This DTC sets when the ABS module receives invalid network data from the PCM . RETRIEVE and DIAGNOSE all Diagnostic Trouble Codes (DTCs) in the PCM . REFER to: ELECTRONIC ENGINE CONTROLS - PLUG-IN HYBRID ELECTRIC VEHICLE (PHEV) .
U1029:00	ABS Control Module Received Invalid Data From Hybrid/EV Powertrain Control Module: No Sub Type Information	This DTC sets when the ABS module receives invalid network data from the Hybrid/EV PCM . RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the Hybrid/EV PCM . REFER to: ELECTRONIC ENGINE CONTROLS - PLUG-IN HYBRID ELECTRIC VEHICLE (PHEV) .
All Other SOBDMC Diagnostic Trouble Codes (DTCs)	-	REFER to: ELECTRONIC ENGINE CONTROLS - PLUG-IN HYBRID ELECTRIC VEHICLE (PHEV) .