LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2014 >> Escape S >> Repair and Diagnosis >> External Pages >> Different car >> Section 446 (Automatic Transaxle Control System) >> Repair procedures >> Adjustment >> TCM learning procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

TCM learning procedure

WARNING: This page is about a different car, the 2014 Hyundai Elantra GT and 2013 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Automatic Transaxle Fluid (ATF) temperature: 40~100°C (104~212°F)
  2. Static learning

    Repeat the below shift pattern four times or more with stepping on the brake.

    Fig 1: Transaxle Control Module Learning Diagram
    G09886204Courtesy of HYUNDAI MOTOR AMERICA
  3. Driving learning

    Drive the vehicle from a stop in D through all gears 1st, 2nd, 3rd, 4th, 5th and 6th gear while holding the throttle steady at the specified Throttle Position Sensor (TPS) value (15~25%).