| PCM DTCs |
PCM
DTCs not listed in this chart |
Refer to
ELECTRONIC ENGINE CONTROLS
. |
| P0562 |
System Voltage Low |
GO to PINPOINT TEST B . |
| P0563 |
System Voltage High |
GO to PINPOINT TEST A . |
| P0620 |
Generator Control Circuit |
The PCM
sets this DTC if the GENCOM circuit or "A" sense circuit are open or shorted to ground. |
| P0625 |
Generator Field Terminal Circuit Low |
GO to PINPOINT TEST D . |
| P0626 |
Generator Field Terminal Circuit High |
GO to PINPOINT TEST D . |
| P065B |
Generator Control Circuit Range/Performance |
GO to PINPOINT TEST E . |
| P0A5A |
Generator Current Sensor Circuit Range/Performance |
GO to PINPOINT TEST I . |
| P0A5B |
Generator Current Sensor Circuit Low |
GO to PINPOINT TEST I . |
| P0A5C |
Generator Current Sensor Circuit High |
GO to PINPOINT TEST I . |
| P1397 |
System Voltage Out of Self-Test Range |
If combined with P0562, GO to PINPOINT TEST B If combined with P0563, GO to PINPOINT TEST A . |