FCIM - Premium
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B00D5:01 | Restraint System Passenger Disable Indicator: General Electrical Failure | CLEAR the DTCs . WAIT 10 seconds. REPEAT the self-test. If DTC B00D5:01 is still present, INSTALL a new FCIM . Refer to FRONT CONTROLS INTERFACE MODULE (FCIM) . |
| B113C:11 | Hazard Switch Illumination: Circuit Short To Ground | CLEAR the DTCs . WAIT 10 seconds. REPEAT the self-test. If DTC B113C:11 is still present, INSTALL a new FCIM . Refer to FRONT CONTROLS INTERFACE MODULE (FCIM) . |
| B1202:01 | Restraint System Passenger Enable Indicator: General Electrical Failure | CLEAR the DTCs . WAIT 10 seconds. REPEAT the self-test. If DTC B1202:01 is still present, INSTALL a new FCIM . Refer to FRONT CONTROLS INTERFACE MODULE (FCIM) . |
| U0155:00 | Lost Communication With IPC Module: No Sub Type Information | GO to PINPOINT TEST Y . |
| U0257:00 | Lost Communication With Front Controls/Display Interface Module: No Sub Type Information | GO to PINPOINT TEST AC . |
| U0423:00 | Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information | REFER to INSTRUMENTATION, MESSAGE CENTER AND WARNING CHIMES to RETRIEVE and FOLLOW DTCs present in the IPC . |
| U2013:63 | Switch Pack: Circuit/Component Protection Time-Out | GO to PINPOINT TEST U . |
| U201A:51 | Control Module Main Calibration Data: Not Programmed |
|
| U3000:41 | Control Module: General Checksum Failure | CLEAR the DTCs . WAIT 10 seconds. REPEAT the self-test. If DTC U3000:41 is still present, INSTALL a new FCIM . Refer to FRONT CONTROLS INTERFACE MODULE (FCIM) . |
| U3000:42 | Control Module: General Memory Failure | CLEAR the DTCs . WAIT 10 seconds. REPEAT the self-test. If DTC U3000:42 is still present, INSTALL a new FCIM . Refer to FRONT CONTROLS INTERFACE MODULE (FCIM) . |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to PINPOINT TEST AD . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to PINPOINT TEST AE . |